Williamston in Ingham County, Michigan — The American Midwest (Great Lakes)
In early times, communities grew up around mills, particularly sawmills and grist mills. Settlers needed to make regular trips to grist mills in order to convert their grain crops into flour or meal for their families, livestock and sale. Other businesses found it sensible to locate their shops near the mill so outlying farmers could run many errands at one time. It is no wonder, the mill was the key to the community… and the millstone was the key to the mill.
The beginning of a town…
In 1834, Hiram and Joseph Putnam of Jackson County, hacked their way through solid timber, to Section 35 on the north bank of the Red Cedar River. Here, they built a log shanty near a 15 acre Indian planting ground. This was only the second settlement in Ingham County. After many misfortunes, the Putnams abandoned their efforts and returned to Jackson.
In 1839, Oswald B. Williams, James Miles Williams and Horace B. Williams, left New York State in search of a new start. Arriving in Detroit, they walked 70 miles to Ingham County to the Putnam's shanty on the Red Cedar River. In 1840, their father, Oswald Sr., came from Genesee County, New York to help the brothers build a dam for a sawmill.
A log dam was built of logs filled with earth and field stones. A raceway diverted water into narrow
The grist mill…
At this time, settlers had to make a three day trip to Dexter to have their grain ground into flour at a grist mill. In 1842, Oswald Williams Sr. went to Detroit, purchased a millstone, and brought it back by oxen. The Williams built The Red Cedar grist mill on the south side of the river. Oswald and Horace, sold their share of the business to James and moved to other towns. James stayed to run the business, marry and raise a family. James Williams sold the mill to Franklin Lombard in 1855, but remained here till his death September 8, 1886.
In 1845, the first village plat was laid out. Since 1839, two townships (Williamston and Locke) were collectively known as Phelpstown, in honor of David Phelps, the first settler in Locke Township. In 1857, by an act of the legislature, the town was renamed "Williamstown," in honor of the three founding Williams brothers. The village was officially incorporated in 1871.
1855 -1880 - mill owners included: Diggs and Corgill of Detroit, Jonathon B. Taylor of Williamston, and Stephen Siegfried (who
1880 - Mead and Fleming
1887 - Hamilton M. Bigelow of Williamston
1899 - the mill was called the "Model City Mill", Wagar and Stewart, proprietors
1922 - the complex was called the "Stewart and Pfeifle Flour Mills"
1931 - the mill is listed as vacant
1941 - the mill operated under the name "Asa Strait and Son Alfalfa Metal Mill"…
How a mill works…
The mill is a multi-story machine. Its ground floor harnesses the water power, which turns wheels or turbines. The turbines turns a main axle, which in turn, turns gear after gear, operating moving machines on each floor. Small mills had only two stories, with a small turbine powering a saw on the floor above. Others were massive, 4-5 story complexes with grain elevators, multiple millstones, meal and flour sifters, conveyor belts and bagging chutes.
Most grist mills had multiple millstones, one for each grain type. Until 1890, most flour in America was made with millstones. Afterwards, most flour was made with a modem roller milling system
Most people might think that millstones are round rocks that merely "turn" and "mash the grain into flour." Not exactly.
It is the millstone that makes the difference. The millstones do the work.
The stone Oswald Willams Sr, brought back from Detroit was most likely a French millstone. Special quartz was quarried principally at La Ferte-sous-Jouarre near the town of Chalons in the Marne Valley in Northern France. French burr (buhr) stones are composed of separate pieces of freshwater quartz each piece is known as a burr. Specially fitted, ground, tapered and dressed, French millstones were the common stone of early 19th century America.
"I can remember the miller turning an iron hand wheel, which opened a valve in the flume which allowed the water to flow. As the machinery started to turn, the whole building vibrated and a window near the hand wheel rattled. To a young boy, this was quite a thrill."
Recollections of Roland Fowler 1977, a lifetime resident of a New York grist mill community.
The only thing left…
This 15' turbine is all that is left of the last Williamston Mill. Called the "flume wheel," it sat upright in the mill house by the river. Rapid moving water, concentrated by the spillway, or "flume", spun the turbine wheels, which in turn, spun the large axle.
Operation: grain to flour…
1. When delivered, grain was taken by a sack hoist, or a chute with a moving conveyor "elevator," to a bin on a higher floor.
2. From here, the miller directed the grain, down a wooden chute, to the right millstone.
3. The miller would carefully feed 50 to 100 pounds, depending on the type of grain, into the millstone hopper (upside down triangle), carefully manipulating the grain into the eye of the runner stone.
4. The grain then fell into a device, hung below the hopper with leather straps called a shoe. It is called a shoe because originally it looked like a wooden shoe. The shoe can be raised or lower at one end to allow more or less grain to fall into the millstones.
5. The damsel was attached to the runner stone and spins around with it at 125 rpm.
6. The grain traveled from the center out, through a gauntlet of specially dressed furrows, till it fell out the edge.
7. The ground grain collected in the surrounding wood vat and fell through the meal spout into a sack or
8. The grain was collected and sent back upstairs where it was cleaned by hand or poured into a boulting machine, which sieved the bran out of the flour.
9.The finished product is directed down wooden chutes into bags for the farmer.
History Plaza funding by Williamston Sunrise Rotary
Design by: Earl Wolf
Thanks to: Charles Dietz Sr., Bernard Eckman, David H. Jones, Cloyce O’Dell & The Depot Museum
Special Thanks to Mitch Lutzke, Kenneth Zichi, Bev O'Malia & The Williamston Downtown Development Authority
Erected by Williamston Sunrise Rotary, The Depot Museum & The Williamston Downtown Development Authority.
Location. 42° 41.408′ N, 84° 17.008′ W. Marker is in Williamston, Michigan, in Ingham County. Marker is at the intersection of North Putnam Street and High Street, on the left when traveling north on North Putnam Street. Touch for map. Marker is located along the pedestrian walkway, west of where High Street dead-ends into Putnam Street. Marker is in this post office area: Williamston MI 48895, United States of America.
Other nearby markers. At least 8 other markers are within 8 miles of this marker, measured as the crow flies. The Bridge (here, next to this marker); Downtown Historic District (about 700 feet away, measured in a direct line); Saint Mary Parish (about 700 feet away); Williamston Center United Methodist Church (approx. 4.1 miles away); Grand River Trail (approx. 4.2 miles away); Haslett (approx. 7.1 miles away); Chief Okemos / Okemos Village marker (approx. 7.6 miles away); Chief Okemos (approx. 7.6 miles away). Touch for a list and map of all markers in Williamston.
More about this marker. Marker is a large composite plaque, mounted horizontally, waist-high, on a decorative black metal post.
Categories. • Industry & Commerce • Man-Made Features • Notable Persons • Settlements & Settlers •
Credits. This page was last revised on June 19, 2018. This page originally submitted on June 17, 2018, by Cosmos Mariner of Cape Canaveral, Florida. This page has been viewed 51 times since then. Photos: 1, 2, 3, 4, 5, 6. submitted on June 17, 2018, by Cosmos Mariner of Cape Canaveral, Florida. • Bill Pfingsten was the editor who published this page.